Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V6 triton starter motor problem

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 49
Joined: Tue Oct 28, 2003 6:25 pm
Location: south port tas.

V6 triton starter motor problem

Post by flexy trol »

hello guys' I'm having touble in pulling the starter motor out of my triton it seems to be a very tight fit because once I undo the two retaining bolts it only slides forward about 20mm and the solinoid hits on the chassis mount where the engine bolts to. So is there a trick or an easy way to get this out without to much trouble. thanks sam.
Top
Posts: 54
Joined: Thu Jul 29, 2004 6:18 pm
Location: Brisbane

v6 starter removal

Post by Rossco »

just unbolt and twist it around until you get the right angle. You may have to drop the exhuast
Will work for beer!!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest