Outer Limits 4x4 Board

can these be rebuilt? by who/ where to get parts? it's off a fj40

wipers only get halfway up the windscreen before grinding to a halt. what problem does this point to? yes the linkages have been cleaned and greased

it could be bad earth.

it happened to mine. had to run a wire to fix it as the windscreen wouldn't earth it due to rust.

my manual (haynes i think) doesn't have a wiper section, what color would the earth wire be, and where does it earth?

i assume u have opened it up already? was there any wires clamped with the screw that holds the wiper motor to the windscreen?

where can you get the contacts for the wiper motor. i pulled it apart, chipped out the old grease, repacked it, and noticed the contacts are only about a mm long, and not really contacting properly.

oh and there was no wire under any of the bolts on it.

but there was an earth wire under the wiper motor on the parts 55 series i'v got sitting there (and the wiper motor is heaps bigger in the 55)

where can you get the contacts for the wiper motor. i pulled it apart, chipped out the old grease, repacked it, and noticed the contacts are only about a mm long, and not really contacting properly.

just to get this str8:
you have found the point required to be earthed? but its no good?


from when I opened mine, there were:
1 wire for the 12V
1 wire for the switch
1 wire for te earth

sorry i'm not clear enough.

earth wire runs through the windscreen and earths under the dash, it is good.

the contacts (bushes or something i think their called) the little metal blocks that contact the coil bit in the motor, so that electricity is continually fed while it is spinning. they are worn out.

well i cant really help now but if you dont have them 100% on the weekend you are more than welcome to pull mine apart to see if you can work out shy yours aint working

mine where not working when i fitted the new windscreen surround i ended up rewiring them myself seems to work fine now so im happy

bad_religion_au wrote:sorry i'm not clear enough.

earth wire runs through the windscreen and earths under the dash, it is good.

the contacts (bushes or something i think their called) the little metal blocks that contact the coil bit in the motor, so that electricity is continually fed while it is spinning. they are worn out.

brushes. on the commutator. have you asked bursons/repco for new brushes?

does your wipers have 3 stages? high, low, int.?

pretty sure the earth wire is Blue with black trace.

there should be a wiring diagram in your book and that will tell you your colours. i know diesels used the same colour wires but in a different order.

MaccA

also earlier models only have 2 stage's, high and low. new ones have the 3 stage. think thats why yours were wrong PC. your windscreen being off a 83 model.

it's a 76, so i don't know what was standard, but it looks like someone added a crude intermediate wiper switch/ dial.

i got them working 99% of the time, regreased the motor, pulled out the solid old grease, but as i said the brushes (sorry) are pretty low... more $$$ once i get it.