Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine swap 4runner oppinions

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 7
Joined: Sat Jan 08, 2005 12:58 pm
Location: brisbane

engine swap 4runner oppinions

Post by garyr »

hi all i want more power in my 4 runner 2.4 diesel its guttless went to alljap engine importers in brisbane to find out if they had any 7m motors as this sounds like a cheap easy option after reading through forum etc.was told by the sales man i would be better of with a 1jzgte motor as they do them cheaper and they have more grunt but i can,t find any info on fitting one or who i could get to do it anyone know anything about this swap or should i stick with the 7m donk tia gary :cool:
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

they might be cheaper and have more power, but you also need to look at how hard the conversion is and if you need to upgrade any parts as well.
ie: brakes

talk to an engineer befor you make any purches of the engine/ frontcut
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

garyr
Posted: Tue Jan 25, 2005 10:24 pm

--------------------------------------------------------------------------------

hi all i want more power in my 4 runner 2.4 diesel its guttless went to alljap engine importers in brisbane to find out if they had any 7m motors as this sounds like a cheap easy option after reading through forum etc.was told by the sales man i would be better of with a 1jzgte motor as they do them cheaper and they have more grunt but i can,t find any info on fitting one or who i could get to do it anyone know anything about this swap or should i stick with the 7m donk tia gary


Can you get a front cut with a manual gearbox? Not sure if it will work. I'm thinking that if it is as easy as the Supra swap, someone would have said something about it by now. ;)
Where the f#@k did that come from
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests