Page 1 of 1
extractors to suit lexus v8
Posted: Wed Jan 26, 2005 8:59 am
by GRINCH
does any know of aanyone that makes extractors to suit a lexus v8 in a lux
Posted: Wed Jan 26, 2005 11:07 am
by brad-chevlux
i'm in the middle of doing a conversion at work right now.
and there is just not enough space to fit proper extractors on there.
i had to make a 'log' style header with 1 inch long runners just to clear the steering box
Posted: Thu Jan 27, 2005 4:03 pm
by UZJ40
Theres a guy, on the gold coast i think, who puts 1UZ's into Cobras. he has done a couple of Hiluxs so he could help you, he knows heaps about THE 1UZFE
Venom custom Fabrications, ask for Scott 0732083224
Posted: Thu Jan 27, 2005 4:31 pm
by MissDrew
They would have to be custom made, even then I don`t think you`d have the room to do it without cutting out the inner guards, You might but hell it would be tight.
Posted: Thu Jan 27, 2005 6:25 pm
by bubs
here are log manifolds i made for my mates 1UZ conversion in his patrol
Posted: Thu Jan 27, 2005 7:24 pm
by brad-chevlux
those are very similar to the one i had to make for the drivers side of the hilux i'm doing
Posted: Thu Jan 27, 2005 7:45 pm
by Yarno
Posted: Thu Jan 27, 2005 8:50 pm
by Meldge
bubs wrote:here are log manifolds i made for my mates 1UZ conversion in his patrol
Very nice work bubs.
Posted: Fri Jan 28, 2005 2:02 pm
by TWISTY
I'm looking at getting some made up for the Lexus V8 in my 4Runner. With the 2" bodylift there is plenty of room to get a set of ok extractors in.
The guys who did the exhuast for my conversion (Shane - Red Roo Carline at Nambour) quoted $100 a pipe ($800 total) to do the job. He used to own TJM at Maroochydore so looks after 4x4ers.
Posted: Fri Jan 28, 2005 5:38 pm
by dow50r
Hi I have a pair of standard manifolds from a 4.7 100 series, they look thesame as the above log manifolds and have heat shields...
Andrew