Looking to get a snorkel fitted in brisbane sunshine cost area. Quotes so far have all been around $450 plus fitting for Airtec or Safari. Ive seen other posts about people getting them supplied and fitted for under $300. Any suggestions for cost effective options or recommended suppliers.
BTW I tried the guy at burpengary listed in another thread who makes/wholesales and he's not too impressed at getting direct calls! "who are you? howd you get my number!"
i think arb must have got up him!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Snorkel suppliers SE Qld
Moderators: toaddog, TWISTY, V8Patrol, Moderators
thanks, Ill check em out,
4wdsystems have what I think is their own brand for $285, cheapest one I've found yet, no idea about the design or quality though. Anybody bought one? www.4wdsystems.com.au (from the OL links page)
4wdsystems have what I think is their own brand for $285, cheapest one I've found yet, no idea about the design or quality though. Anybody bought one? www.4wdsystems.com.au (from the OL links page)
snorkel
Hi,
I have a 4wd systems snorkel, got it through adelaide, they sent it over to melb for me. Had it for almost a couple years now, the quality is very good, no fading or cracking of any parts, only problem i had was when fitting it. The front section where it enters the front panel is very close to the inner tube, meaning where you cut the panel is visible. I believe other brands have the outer section covering the part that goes inside and therefore you don't see any of the cut section of the front panelwork.
apart from that i cant complain and its quite easy to fit, the instructions and cuting guide are very good. As you already know the price is quite good also.
Hope that helps you decide....
I have a 4wd systems snorkel, got it through adelaide, they sent it over to melb for me. Had it for almost a couple years now, the quality is very good, no fading or cracking of any parts, only problem i had was when fitting it. The front section where it enters the front panel is very close to the inner tube, meaning where you cut the panel is visible. I believe other brands have the outer section covering the part that goes inside and therefore you don't see any of the cut section of the front panelwork.
apart from that i cant complain and its quite easy to fit, the instructions and cuting guide are very good. As you already know the price is quite good also.
Hope that helps you decide....
Shut Up, Get Out, & Start Digging...
Re: Snorkel suppliers SE Qld
not being from Qld, dont know where Cris is at, but try him anyway
_________________
CRIS' 4 X 4 ACCESSORIES CABOOLTURE QLD
07 5495 2211
0417 616 764
...
_________________
CRIS' 4 X 4 ACCESSORIES CABOOLTURE QLD
07 5495 2211
0417 616 764
...
Re: Snorkel suppliers SE Qld
bogged wrote:not being from Qld, dont know where Cris is at, but try him anyway
chris and above post are good options and yes this is in the right region bogged...
_________________
CRIS' 4 X 4 ACCESSORIES CABOOLTURE QLD
07 5495 2211
0417 616 764
...
2015 200 Series Gx TTD - ................ Fark 3L's -
Re: Snorkel suppliers SE Qld
Bingham wrote:bogged wrote:not being from Qld, dont know where Cris is at, but try him anyway
chris and above post are good options and yes this is in the right region bogged...
_________________
CRIS' 4 X 4 ACCESSORIES CABOOLTURE QLD
07 5495 2211
0417 616 764
...
well said.
Who is online
Users browsing this forum: No registered users and 2 guests