Outer Limits 4x4 Board

building a new set of shackles and need the shackle bolts, greasable or not, really doesn't bother me. i know you can get them, cause the booty fab shackles i pulled from it have them (but the bushings were in so tight i had to bugger the thread to get it out.

it's for a 40 series if it matters.

Toyota, ARB (greasable shackles)

Bazzle

I think Ironman suspension in Clayton sell them. Got greaseable ones for the Radier there and if they have stuff for my 4b, then yours should not be a problem

toyota told me only full shackles were available (this isn't going to be a stock setup)

bad_religion_au wrote:toyota told me only full shackles were available (this isn't going to be a stock setup)

Ford told me the same about the Raider I think I paid $30 (included freight to my door in sydney overnight) from Ironman Suspension for the front set and a tad more for the rear set.

Just checked the Ironman website and yep they sell greasable shackles for just about anything including the 40 both pre 1980 and post 1980

i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .

don kyatt in west melb

rock hopper wrote:i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .

Can we see the rest of this please

Ad - Carrolls Springs - north (past Coburg they're on Sydney Road) they make them, less mark up

Any Bolt Shop. - I.e Cost Less Bolts - in ringwood.

Hi Tensile with lock washers.

Dave

mule75 wrote:don kyatt in west melb

thanks again, i did get your SMS.

don't need them anymore for this truck, ended up fixing the threads, but may need some for a 1980 troopy one day soon.