Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
right angle dizzy conversion
right angle dizzy conversion
does any body know if there is a right angle dizzy conversion, to fit a swift/barina motor to my sierra? It was a 1.0 litre, self converted to a 1.3. it sits 12mm further forward than a std 1.3 would...due to smoke and epa warning, got to repair more quickly, bummer.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
The only comercially available ones I've seen are for the twin cam motor.
I can't remember what we used on mine ( baleno 16v) but it involded the sierra lower housing with some front wheel drive dizzy housing ( early astra perhaps?) The big problem is that the standard dizzy will be spinning back to front.
You could always just cut and box a hole on the firewall above the heater.
I can't remember what we used on mine ( baleno 16v) but it involded the sierra lower housing with some front wheel drive dizzy housing ( early astra perhaps?) The big problem is that the standard dizzy will be spinning back to front.
You could always just cut and box a hole on the firewall above the heater.
www.bbmotorsports.com.au
Who is online
Users browsing this forum: No registered users and 0 guests