Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series gearbox 4 75 series
Moderators: toaddog, Elmo, DUDELUX
60 series gearbox 4 75 series
as the heading says, will a 60 series gearbox and transfer case be a straight bolt on?
As long as its not a HZJ box your replacing. And> 10/85 has the small idler pin in the transfer. 10/85> has the 38mm idler pin pull the plate off the back of the transfer(the one in line with the mainshaft) and check the big nut isn't loose. This is the main reason the shaft wears out the spline for the input gear in the transfer.
I'm not stuck I'm over here!
Watch where you driven!!!
Watch where you driven!!!
Who is online
Users browsing this forum: No registered users and 0 guests