I have a 90 sr5 4runner with the add front diff. I wish to look into the option of putting manual locking hubs on it. Can someone perhaps guide me in the right direction.
Cheers,
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
manual hub conversion for a ADD diff
Moderators: toaddog, Elmo, DUDELUX
Pongo
Smart move as it saves on wear and tear of the boots, CV's etc and if you break something in the front you can always unlock the hubs to drive home
Its no big deal and I have had them on my ADD 4Runner for years. Its a straight bolt up. But you have to get some from an IFS 4Runner as the hub splines are different to the live axle hubs.
But you must always remember to never click the "4wd" button unless the hubs are locked .
JD
Smart move as it saves on wear and tear of the boots, CV's etc and if you break something in the front you can always unlock the hubs to drive home
Its no big deal and I have had them on my ADD 4Runner for years. Its a straight bolt up. But you have to get some from an IFS 4Runner as the hub splines are different to the live axle hubs.
But you must always remember to never click the "4wd" button unless the hubs are locked
.
JD
Who is online
Users browsing this forum: No registered users and 0 guests