Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Triton Hot up incline?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 7
Joined: Thu Jul 22, 2004 7:24 pm
Location: Melbourne Victoria

Triton Hot up incline?

Post by bennycee »

Often when climbing tracks for sustained periods of time I find my temperature guage rising into the danger zone.

Car is a 94' Triton 4X4 cab chassis turbo diesel with 2" lift.

Radiator, thermostat and water pump are all recently replaced, wondering if it might have something to do with the turbo?

Would a bonnet scoop help by moving more air around the engine bay?
What are the benefits of an inter-cooler?

Another thought was to install a snorkel on both sides, one diverted to the air intake an d the other to the engine bay!

Any feedback would be greatly appreciated,

Cheers.
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Hmmmm obviously a 2.5 turbo diesel.
There's something not right there if everything is working as it should it should lug up steep hills in 1st low all day without any drama's (except for probly extremely hot days).
Have you checked the clutch fan ?
At such low speeds thats virtually all the airflow you get so twin snorkels or a bonnet scoop won't make much difference IMHO.
I wired up my A/C thermo fan to a switch on the dash to boost airflow in those situations but it's rare I have to use it (more as insurance).
Mine did the same thing a few years ago and it was the clutch fan (3.0V6). You can buy a new clutch fan assembly from Autobahn for $130 (Powermax brand) Mitsu genuine are around $550 :shock:
I just luv my "clacker Jabber"
Posts: 7
Joined: Thu Jul 22, 2004 7:24 pm
Location: Melbourne Victoria

Post by bennycee »

Cheers,
I will get onto that.

Still looking to know more about intercoolers and their pro's and cons?
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

A turbocharger gets hot real fast when working hard, and heats the incoming air charge, causing it to expand. An intercooler will cool it a little, making it denser, so more oxygen ends up in the cylinder to burn fuel with. That's why they're good.

The only significant downside I know of is the increased air mass between turbine and inlet manifold. This is extra air which needs to be compressed by the turbo, adding to turbo-lag. You don't get something for nothing! :D

Cheers,

Scott
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

my NH does the same going to take advice from this forum and get a new clutch fan cant get a power max all out stock but im picking up a davis craig one for $165.00 +gst bloody 2nd hand one's go for around $170.00 with fan
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

i had the same issue not long ago in my v6 3.0L auto ... turned out to be the clutch fan - once replaced was perfect. But as frank said, doing the a/c fan mod (which i did) is pretty much overkill (i havent had to use it yet)

just my 1.5 cents

oh .. one more thing .. imlachs here in melbourne are pretty good for 2nd hand - mine only cost around $65 + $10 for delivery (so can get delivered australia wide too).
Posts: 161
Joined: Mon Jan 06, 2003 4:46 pm
Location: USA

Post by Lordtrunks »

If your a bit short on cash or just wanna see if its the fan clutch you can take the clutch apart put sand, rocks, bolts or what ever that will fit in there and that will lock that thing right up. Did that to my friends 88 never over heated again took for ever to warm up in the winter but never got hot. :D
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
Posts: 367
Joined: Fri Jan 21, 2005 10:45 am
Location: Tasmania

Post by Tas_Dean »

I had a clutch fan die on a toyota (not a 4by) some years ago. I used a couple of self drilling metal screws through the clutch assembly, which worked a treat but it sure was noisy!
Cheers, Dean
Just a web wheeler now!
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Hi bennycee
I wouldn't fit a used fan clutch as there is no real way of telling if it is any better than your own, I would hqwever ,if you are thinking of replacing
the coupling, lock it solid and test to see if it solves the problem.
If not ,turbo diesels, show up head gasket/cracked head problems under boost ie under load up an incline. Check the radiator neck for air bubbles escaping from the coolant, this is sometimes a giveaway.
J Top
Posts: 20
Joined: Fri Mar 05, 2004 9:42 pm
Location: Western Vic

Post by ianmc »

Are U sure your clutch fan doesnt just need a refill with the right oil .
Fan, if OK should speed up when you increase idle & shut down quick when you snap the throttle shut. If it lags & spins its out.
Thinking of going somewhere
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests