Page 1 of 1
1.3 2 1ltr Transfer
Posted: Wed Apr 30, 2003 10:04 pm
by map
I am currently thinking about changing my 1.3ltr transfer case to a 1ltr has anyone done this and what have they had to change to get it to fit.
Reason Im changing is so I can use 5th gear again after loosing it from putting bigger tyres under it.
Any help would be grateful
Posted: Wed Apr 30, 2003 10:52 pm
by N*A*M
the flanges chance size after '86
Posted: Thu May 01, 2003 6:29 am
by map
Can i take the flanges off of th e 1.3ltr and swap them for the one ltr flanges so everything matches up
Posted: Thu May 01, 2003 9:38 am
by N*A*M
i think so. it's a pita to get the flanges off but i think they should fit. i have a '84 1L tcase for sale if you want it.
Re: 1.3 2 1ltr Transfer
Posted: Thu May 01, 2003 10:00 am
by christover1
map wrote:I am currently thinking about changing my 1.3ltr transfer case to a 1ltr has anyone done this and what have they had to change to get it to fit.
Reason Im changing is so I can use 5th gear again after loosing it from putting bigger tyres under it.
Any help would be grateful
I think you need to reuse your 1.3 arms, should be worth doing, I have a 1.3 with 1litre case, but mine started as a one litre, and the road gearing is excellent(need a 6th gear) christover
Posted: Thu May 01, 2003 9:42 pm
by Midget
I started with a 1ltr transfer and then changed to a 97" model case so i could run the serie 3 rockhopper gears.
The only thing i changed was the flanges and also put the tailshaft handbrake off the 1ltr onto the 97" case.
Jamie
Posted: Fri May 02, 2003 7:27 am
by OVERKILL ENG
The 1.3 flanges are different to 1 litre you will have to redrill them.
SAM