J20 Jeep?
Posted: Thu May 01, 2003 3:10 pm
What axles and drive train do the ones with the in line six and manual have.
Page 1 of 1
Posted: Thu May 01, 2003 3:38 pm
Okay I will search myself. Now I have to open two windows bugger
Posted: Thu May 01, 2003 3:57 pm
D44 Front 4.1:1 ratio. D60 rear FF with 27 spline axles (not 35 spline). NP208 T/case and perhaps T18 (not sure on the 6 clyinder).
Rod
Note: This is for a early to mid eighties Aussie Spec J20.
Rod
Note: This is for a early to mid eighties Aussie Spec J20.
Posted: Thu May 01, 2003 5:02 pm
Sorry hadn't been about much.....yup Rod's right on the money - but that don't mean that any rig you find still has those bits :wink:
Posted: Thu May 01, 2003 10:01 pm
Wooders wrote:Sorry hadn't been about much.....yup Rod's right on the money - but that don't mean that any rig you find still has those bits :wink:
Yeah there are two up here that are in a wreckers complete one is in mid rebuild all the running gear was redone but has obviously not been worked on in a while. The motor which is a six is in Long form nuthin hooked up. $2800
The other is a worker I didn't actually look under the hood just got underneath and not being a big Dana spotter didn't really know what I was looking for. $2200
Done some research at Dynatrac and have it all sorted. Both are manual boxes and from the pics I looked at elsewhere they seem to be NP208's
Iwas actually there looking for other bits but they got me thinkin.
He had a Merc there too with an injected V8 in it. Anyone thinkin the same crazy shyayt I am thinkin
Posted: Thu May 01, 2003 10:28 pm
I don't think anyone else thinks the way you do 
Posted: Fri May 02, 2003 8:35 am
Singo17 wrote:He had a Merc there too with an injected V8 in it. Anyone thinkin the same crazy shyayt I am thinkin
Yep I've always wondered about the Merc V8, if you can get em cheap enough then its gotta be worth some investigation
What about all those nice Geman 6 packs as well
Posted: Fri May 02, 2003 11:18 am
suprasurf wrote:Singo17 wrote:He had a Merc there too with an injected V8 in it. Anyone thinkin the same crazy shyayt I am thinkin
Yep I've always wondered about the Merc V8, if you can get em cheap enough then its gotta be worth some investigation
What about all those nice Geman 6 packs as well
It is 2,500 for the merc which is running I would not have the first clue on how much I would be able to recoup wrecking it.
Posted: Fri Jul 18, 2003 10:31 pm
what wreckers were the j20 jeeps at?
Posted: Sat Jul 19, 2003 12:51 am
Run the Merc V8 and Auto with a divorced np205 and you have a very good cheap drivetrain.
Posted: Sun Jul 20, 2003 6:52 pm
ever rebuilt a merc v8 
not cheap depending on modelcost between $2000 to $4000 depending on what u did to it . valves in heads are sodium filled about $125 eacause they can and do break timming chains when given a hard time 
not cheap depending on modelcost between $2000 to $4000 depending on what u did to it . valves in heads are sodium filled about $125 eacause they can and do break timming chains when given a hard time