Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Well after 3 trips and 3 snapped rear left axles in my GV, I'm looking at options for the rear axle shafts. I'm running 31's and F/R air lockers, and I'm snapping them at low rpm trying to pop up small steps.
My options seem to be to replace the rear axles and diff with XL7 parts, but I can no longer have my rear locker....or get someone to make up some axles for the GV in a better material. I also have the option of changeing the sidegears in the airlocker to 27 spline this would give me a few extra mm in dia at the spline. This would be my first choice, has anyone done this? And could someone point me in the right direction as to who I should be talking to about getting this done.
dont know if the make them for the vit
but im running newfields axles from the states F/R in the zook with 34s and going at thing hard and havnt snapped one "yet"
.....ive done 3 rear axles too 
