CV applications

[Davidh]

Hi all,

Thought i'd start a post on cv part numbers and applications.
I.E. which cv's were used in which model Land Rovers in Australia.
Can't seem to find too much info on the net for Australian Rovers, mostly U.S.
It would be good info for the FAQ.
Not just the good cv's though, what were ALL the cv's used.

eg. Range Rover 77-??, Discovery 91-?? Defender ???? etc.

Thought it could be a good idea so people know what they have and what is available!

[ISUZUROVER]

Plenty of info if you know where to look.

Here are the 3 that Mal Story calles the "good" rover CV's

R606665
Early R/R & Disco CV joints (RR 1969-1987 (to VIN EA305589) - Disco 1989-1993) - 23 spline inner, 10 spline female outer (no stub axle)

AEU1828
Stage one S111 - 23 spline inner 24 spline outer stub

AEU2522
County and 200Tdi Defender - to axle #20L48865 1984-1994 - 23 spline inner 24 spline outer stub (same as AEU1828 but a slightly longer stub)


And here are the crap ones... The info is a bit confusing for some of the later RR/Disco ones - can anyone clarify - LR may have multiple part numbers for the same CV.

RTC6862
300Tdi Defender (1993 - current) - crappy (tiny) 32 spline inner, 24 spline outer stub - from axle #20L48866

RTC5843
Later model S1 Disco (Non ABS - 1993 - ?) and RR (Non ABS - 1987-1989 (VIN EA305590 - JA624755))

RTC6811
Later model S1 Disco (ABS) and RR (ABS - 1987-1989) - with 10 spline outer

TDJ000010 - possibly also STC 3051?
Range Rover Classic 1992-end ABS Disco 1 - with 24 spline outer (I think).

STC3204
P38A Range Rover - don't know splines

TDR100790
S2 Disco - don't know splines

[Davidh]

That is EXACTLY what I was looking for!
Great work Ben!