Page 1 of 1

Help!! hilux gearbox removal

Posted: Fri Mar 18, 2005 11:29 am
by macklux83
SORRY GUYS,but one more question about removing the gearbox of a 2L engine,i have got everything off except for 2 nuts which seem impossible (for me) to get to. The first one is at the back of the starter motor and is holding it in place, i cant figure out how to get at it because of all the shit in the way and the second is the top one on the drivers side sort of next to the exhaust manifold,ive taken the exhaust off but just cant see how to get it out!
any help would be great fellas
cheers

Posted: Fri Mar 18, 2005 11:43 am
by roberts
do you have a wobbler for your socket to go on i just put a new box in my hilux and these things are invaluble

kind on looks like a universal joint that goes inbetween the socket and the extention

good luck

bolts

Posted: Mon Mar 21, 2005 8:08 pm
by rumble
not long done the same thing-used the wobbler plus all the extensions we had to get good leverage-there were real tight! The body lift helped to get in there and it was on a hoist.

Posted: Tue Mar 22, 2005 1:21 am
by Gribble
Try getting a 17 and 19mm spanner. Place the 17mm ring end on the nut/bolt to undo facing upwards to the bonnet. Link in the 17mm open end with the 19mm ring end to make one large lever. If you have no body lift this method is the easiest.

NB. Make sure your battery terminals are off before removing the starter. ;)

Posted: Wed Mar 23, 2005 9:06 am
by roberts
what sort of 4b do you have rumble

what happened to your gear box

mine spat 5th and reveres

gearbox

Posted: Wed Mar 23, 2005 9:39 am
by rumble
I was just replacing the clutch in mine -its a '94 diesel dual cab-so far I havent had any gearbox problems

Re: Help!! hilux gearbox removal

Posted: Wed Mar 23, 2005 9:21 pm
by BOGAN V8
macklux83 wrote:SORRY GUYS,but one more question about removing the gearbox of a 2L engine,i have got everything off except for 2 nuts which seem impossible (for me) to get to. The first one is at the back of the starter motor and is holding it in place, i cant figure out how to get at it because of all the shit in the way and the second is the top one on the drivers side sort of next to the exhaust manifold,ive taken the exhaust off but just cant see how to get it out!
any help would be great fellas
cheers


Put a 3" body lift in makes gettin to these bolt heaqps easier and gives you more clearance for bigger rubber :D :D :D :D