Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spring v Body lift - RR

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Spring v Body lift - RR

Post by walker »

Who is driving there Rangie with just a spring lift? It seems that body lifts are most popular (I guess the keep centre of gravity lower) but a spring lift I would have thought would be a lot easier & cheaper.

Will I fit 34" tyres on a 84 Rangie with just a 2" spring lift & some guard chopping?

Thanks,

Adam
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

nope 34s will rub.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

So I have to do a body lift no matter what. :x
Thanks,

Adam
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Re: Spring v Body lift - RR

Post by TuffRR »

walker wrote:a spring lift I would have thought would be a lot easier & cheaper.



I reckon once you take into account all the costs involved in a spring lift above say 2-3 inches, a body lift will be cheaper and easier.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

I run 35" x 12.5 BFG's on 7" rims with only 2" spring lift on an 1984 4 door.

Minimal rubbing. Lots of chopping. Pics in Post up your rovers thread
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

Ok, thanks Maggott, I guess I can only try. This vehicle will only be for offroad so I don't mind some heavy chopping.

I reckon once you take into account all the costs involved in a spring lift above say 2-3 inches, a body lift will be cheaper and easier.


Is there any other changes necessary with a 2" spring lift. If not then I would have thought this would be a fair bit cheaper as I would be changing all shocks no matter what I do and springs are very cheap.
Thanks,

Adam
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests