Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

removing outputshaft from t700 gearbox

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

removing outputshaft from t700 gearbox

Post by STUMPY »

having a bit of trouble removing the output shaft to replace it with the marks one.

here is where i'm up to. what you can see is the inboard end of the shaft but having trouble getting it out. any pointers?
cheers joel
You do not have the required permissions to view the files attached to this post.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Joel this is realy something that should be left up to a Trans Specialist. I have rebuilt all sorts of Manual Gearbox's and still wont touch an auto.
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

have you removed the clip from the side inside the case. this holds it in. try getting a hold of a vn auto manual it explains it all.
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

thankyou for your feedback. tony i know that i'm over my head in this and if it all turns pearshaped then it'll go to the trans shop. ruggers can you suggest which manual is best. was looking through one and it was simple a service rather than a pull down and rebuild.

cheers joel
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

haynes normaly have a fairly good description of most parts...
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

I've got a vp gregorys manual and it has a strip down of every part of the car bar the auto pretty much.
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

i was able to get a hold of the guine holden manual. i think theres a guy in ebay selling them on cds now or you might get on new from a holden dealer now idea on price
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

thankyou for that ruggers
the box was going back together this arvo until i cracked the sh1ts.
Top
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

mad_landie wrote:haynes normaly have a fairly good description of most parts...


Haha. My haynes manual for me disco says you should get it checked by the dealer or trans specialist. Doesn't even show any pictures of the internals to make you feel like your doing d.i.y stuff :cry: :oops: . It does this fot the transfer and manual box too.
Top
Posts: 193
Joined: Sat Jul 10, 2004 6:11 pm
Location: Sunshine coast Queensland

Re: removing outputshaft from t700 gearbox

Post by SLOGQ »

STUMPY wrote:having a bit of trouble removing the output shaft to replace it with the marks one.

here is where i'm up to. what you can see is the inboard end of the shaft but having trouble getting it out. any pointers?
cheers joel


The sun gear is covering up the output shaft retaining clip, it will just lift out. The clip can be a total pain in the ass to remove, i have a pair of snap on circlip pliers that are designed just for that clip. If you still having problems, ill get the part number of them when i go back to work. Hope this helps mate...... :)
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

yeah thanks alot. got most of it back together now.

cheers
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests