Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Oil Cooler lines on 98 3.9 disco motor

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Oil Cooler lines on 98 3.9 disco motor

Post by RUFF »

Anyone know if the Oil Cooler lines on a 98 disco 3.9 can be blocked off? I am about to fit one to me 86 rangie and although i have the disco radiator to go with it i dont have the oil lines. So wanted to blank these off till i can get some lines but wasnt sure if the oil cooler lines are just on a bypass system.
Posts: 29
Joined: Tue Nov 09, 2004 1:59 pm

Post by kurmit »

If you are going to run the serpentine belt system you cant just block the outlets on the timing case you have to link them with a hose you can call me if you want and i will explain it to you 0397396989
A & J racing
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Thanks got it sorted. You dont happen to know anything about bypassing the engine imobiliser on a 98 disco EFI harness do you?
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests