While I was searching thru the back of my 410 doing my inventory on parts I may still need, I realized that I'm missing parts needed to put the engine back in. I have the complete motor mounting set-up for the passenger side (engine bracket - insulator - frame bracket), but on the driver's side I am missing the frame-side bracket, and the insulator. I realize the engine-side brackets are different from a Samurai, but how about the frame-side brackets? What about the insulators? If they are the same as the Samurai part, I have a spare 1.3 here that I can rob one from. Same with the frame brackets, but if they are different I will have to start the parts search again.
Thanks!
IJ
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Motor mount questions
Motor mount questions
The only difference between a rut and a grave is the depth.....
Who is online
Users browsing this forum: No registered users and 0 guests