I have heard the shorty's can be restrictive due lifts due to vibrations in the drivetrain due to the angle of the drive shaft? Is this true?.. and if so, how can it be overcome?
I was looking at 4 inch suspension and 2 inch body lift...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ shorty
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
move the axle back about 60mm using all adjustable links (good for tyre clearance once the quarter panels are cut off) cut the coil plates off the housing and rotate forward so you can point the pinion up higher, move the shock mounts back and up. The standard shaft will work with 6" coils with all this done. Sounds like a lot of work, but I did the majority of it in a weekend and I am by no means a good mechanic. Look out for the panhard or the brake valve hitting the fuel tank.
Who is online
Users browsing this forum: No registered users and 32 guests