Page 1 of 1

Disco Diffs.

Posted: Tue May 13, 2003 3:33 pm
by Dozoor
Got half a chance to get hold of some 24 spline disco diffs for my thing.
I was going to do the toyota centre axle thing but these are cheap BUT
can you guys tell me the,
Axle size difference?
centres the same?
ratios are ?
brakes the same diamater?
will early rover rims bolt up ?
Ive been told these will bolt up to my RR chassis?
Have to travel a couple hour to get them so if i know what im looking at before i get there will help thanks ! :D
Oh are these heaps stronger?

Posted: Wed May 14, 2003 3:44 pm
by Bodge
They do pretty much bolt on and the ratios are the same.

Yes they are stronger - but only just - not by enough to justify the time and money.... unless you are getting them free and you can put them in yourself....

You were on the right track with the Hilux centres and jacmac axles....

That is unless you were planning to run 31's round the mall :mrgreen:

Posted: Wed May 14, 2003 5:15 pm
by Dozoor
Thanks bodge , back to the lux bits then :(

Re: Disco Diffs.

Posted: Thu May 15, 2003 11:38 am
by ISUZUROVER
Axle size difference?

33% larger diameter (over 10 spline)

centres the same?

yes, just that 1 diff will have 24 spline side gears the other will have 10 spline

ratios are ?

3.54:1 same as you should have

brakes the same diamater?

don't know, probably ventilated front

will early rover rims bolt up ?

Yes

Ive been told these will bolt up to my RR chassis?

Yes

Have to travel a couple hour to get them so if i know what im looking at before i get there will help thanks ! :D
Oh are these heaps stronger?

The axles will be lot stronger than 10 spline, but you still have a single pin diff centre and same CW&P.

Posted: Thu May 15, 2003 12:03 pm
by HSV Rangie
Put the yota centres in your housings.
Michael.