Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

speedosensor cable snapped

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

speedosensor cable snapped

Post by hottiemonster »

Anyway, whilst wheeling in Labatouche on sunday night, i snapped my speedo cable at the connector which is just behind the bellhousing.

there are 2 wires coming from the speedosensor (green & black) and i need to know which way they connect to the other 2 wires. the other two are grey and blue which join into a protective covering with other electrical wires.

another question is, can i just use simple connectors and put tape around them, or do i need a special type of connector?

thanks

Peter
Gq ute new built
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Probably better to solder and put shrink wrap around them.
THOUGHT FOR THE DAY....
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests