Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front bearing setup GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

front bearing setup GQ

Post by familybus »

gday guys! just wondering if anyone has a detailed pic of the bearing setup for a GQ! reason being, i renewd bearings and brakes on the front of my mav and found a ring just behind the last peice that goes on before the final outer casing with the allan keys in it, it was on the left side but not the right and it made it hard to put the little clip on the holds the last bit on so we didnt bother trying to get it back in instead opting to chuc out the outer ring thingy! when engaged in 4LOW it makes a clunking noise when climbing but when in either 4 or 2 high, its fine! what im guessing is that the shafts have to be in a certain position so as to be able to push the last bit in with the ring in there and put the clip on maybe? and maybe that ring was to stabilize the the second last bit so it doesnt skip teeth? please if anyone knows the trick to it please let me know! thanks guys
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

ahh u need to have it all in there .. it'll be when ur in 4wd the cv popping in and out of the hub ... not good
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

You need that little"C" clip on both sides dude.
Dont expect mere proof to sway my opinion.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

its not the c clip! you got the c clip, then the hat lookin thingy with teeth inside it and then theres a big thin metal ring that sits on the outer edge! thats the one i threw out
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

anyone with a detailed diagram?
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

btt :armsup:
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

try this

Bazzle

Edited 2nd Pic added :P
You do not have the required permissions to view the files attached to this post.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

thanks a shite load bazzle! good stuff now all i got to do is find a wreckers in sydney willing to seperate, its the spacers four back from the c clip!
thanks again dude
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests