Respray Cost

Post by **Mudzuki** » Wed Apr 13, 2005 12:54 pm

Well, im sick of the crap respray i did on the zook, and im looking to get it done properly.

What is the cost of getting a panel beater to spray it in 2 pac?

Post by **munga** » Wed Apr 13, 2005 1:12 pm

a panel shops gunna charge you more than you'd like. my advice would be to buy your own paint. ask about polyurethane or polyamide cured epoxy or something like that at your local dulux/wattyl/ameron/international industrial paint store. a lot cheaper than auto paint, and plenty good enough for a fourby. then find someone with a spraygun and go nuts. buy heaps of thinners and clean everything before the paint dries on it.

or ait for some good samaritan to offer to paint it for you.

Post by **grimbo** » Wed Apr 13, 2005 1:24 pm

don't waste your money on a quality paint job. As your signature says, save for lockers and a winch.

Post by **antt** » Wed Apr 13, 2005 2:23 pm

a straight resprany in 2pac basecoat will only cost ya $200 or so, thats all that mine is, 3 coats, no clear, no polishing or anything and it comes up looking good

i wouldnt even waste my time looking at acrylic or enamel after seeing how easy 2pac is, its worth the little extra

as for getting a panel beater to do it, if you prepped it and everything, and they just had to spray it, i reckon you be looking at at least $1000 to do it

Post by **Mudzuki** » Wed Apr 13, 2005 3:41 pm

antt, did you spray the 2pac yourself?

was it pre thinned?

hows it go with staining with no clear coat?

Also, with getting into the comp scene, it is easier to get sponsors if you have nice shiny paint

Cheers

Post by **antt** » Wed Apr 13, 2005 3:58 pm

Mudzuki wrote:antt, did you spray the 2pac yourself?

was it pre thinned?

hows it go with staining with no clear coat?

Also, with getting into the comp scene, it is easier to get sponsors if you have nice shiny paint

Cheers

i did the prep work on mine and had a friend paint. all ya have to do is mix something like 2 parts basecoat to 1 part thinner, then ad a tough of hardner. we used a product called 'rocket' hardner on mine, and it was right to drive home 1hr after painting

its fine with no clear coat, the surface is shiny and not porous, just like normal car paint. so it doesn't stain

as for the comp scene thingo. i think its easier to get sponsors if you have nice, even bright paint, which is part of the reason i did mine so bright. cause bright colours show up in pics better (for mags and vids), and attract attention. downside is it also attracts cop attention as well

Post by **antt** » Wed Apr 13, 2005 4:04 pm

about the earliest pic i can find of when it was done, nice and shiny :cool:

Post by **alien** » Wed Apr 13, 2005 5:30 pm

how cool would it be to paint a car with glow in the dark paint? hahaha

Post by **DeWsE** » Wed Apr 13, 2005 5:40 pm

alien wrote:how cool would it be to paint a car with glow in the dark paint? hahaha

okay ricer boy!

Post by **jcianci** » Wed Apr 13, 2005 6:01 pm

dude i just did mine. it was SCREWED. Bent, dented you name it. My mate is a panelbeater. I just bought bog, undercoat 2pac, and 2k solid 2pac colour. so far i have done 2 coats of undercoat and one of the 2k colour and it looks wayyyy better. cost me about $270 for everything and looks like factory quality. its the same application as acrylic but it involves hardeners. its eaaaasy. YOu wont regret it. but something i learnt is, prep is everything.

Post by **alien** » Wed Apr 13, 2005 6:18 pm

*cues vanilla ice* - "rice rice baby... dun dun dun dun dun dun"

that green is a VERY awesome colour!

when it comes to the time i start considering how my zuk looks to others, ill be getting it done in a metallic pewter/titanium colour... should look awesome!

Post by **markil** » Wed Apr 13, 2005 6:42 pm

jcianci wrote:dude i just did mine. it was SCREWED. Bent, dented you name it. My mate is a panelbeater. I just bought bog, undercoat 2pac, and 2k solid 2pac colour. so far i have done 2 coats of undercoat and one of the 2k colour and it looks wayyyy better. cost me about $270 for everything and looks like factory quality. its the same application as acrylic but it involves hardeners. its eaaaasy. YOu wont regret it. but something i learnt is, prep is everything.

That's an awesome colour, i love it :cool:

Post by **Shorty40** » Wed Apr 13, 2005 7:00 pm

Haha - nice colour jcianci :armsup:

Mine is similar but cost $25 :lol:

Post by **munga** » Wed Apr 13, 2005 7:42 pm

alien wrote:when it comes to the time i start considering how my zuk looks to others, ill be getting it done in a metallic pewter/titanium colour... should look awesome!

you mean silver?
:lol:

ps: love the tenny fie dorra job

Post by **Shorty40** » Wed Apr 13, 2005 9:28 pm

munga wrote:love the tenny fie dorra job

Yup - 10 x rattle cans at Crazy Clarks :lol:

Post by **Mudzuki** » Wed Apr 13, 2005 10:59 pm

Well, prep aint too hard, as i did that before my rattle can attempt, but it ended up going porous after about a 2 months :cry:

Will have to have a chat to a mate, whos dad will be spraying his ute soon, as ive had no gun experiance.

Will have to find a nice bright red :cool:

Post by **mtzook** » Fri Apr 15, 2005 3:07 am

rustoleum + roller = nice paint job.

Takes about half an hour for the whole car. Only thing to watch is roller lines...

Outer Limits 4x4 Board

Respray Cost

Respray Cost

2pak 4 lyf y'all

Re: 2pak 4 lyf y'all

Who is online