Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1FZ in a 60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

1FZ in a 60

Post by turbo4t »

Anyone done this or know of any inhearent problems. Is the boltup the same between 3F and 1FZ. I know the 80's came with both motors but wasn't sure if the engine mounts and bellhousing bolt up was the same. Thanks.
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Bolt up is different the 1FZ never came out bolted up to the early type cruiser box but anything can be bolted up if the need be. The 1FZ in the 75's used the same box as the 80's only the 1HZ & 1HDT diesel's can use the earlier box using a factory bellhousing.


Wally
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests