Page 1 of 1
1FZ in a 60
Posted: Thu Apr 14, 2005 8:00 am
by turbo4t
Anyone done this or know of any inhearent problems. Is the boltup the same between 3F and 1FZ. I know the 80's came with both motors but wasn't sure if the engine mounts and bellhousing bolt up was the same. Thanks.
Posted: Thu Apr 14, 2005 7:45 pm
by 80UTE
Bolt up is different the 1FZ never came out bolted up to the early type cruiser box but anything can be bolted up if the need be. The 1FZ in the 75's used the same box as the 80's only the 1HZ & 1HDT diesel's can use the earlier box using a factory bellhousing.
Wally