Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 speed MQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

4 speed MQ

Post by stewie81 »

I have MQ with 4 spd with L28.. I am looking for another one as this one has seen better days...

But Whilst looking and talking with wreckers I have been to there is 2 types of set up's.???

Mine goes G/box little tail shaft then Transfer ? Is this the common type?

Cheers
Stewie
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

Yea, you get the T100L transfercase, this has a small propshaft between the gearbox and transfercase, and the T130A transfercase bolts up directly to the gearbox, I believe??
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

correct.

You have the divorsed transfer.

from that i can tell u that its more than likely an MK, and also its a LWB wagon.

Wat u will find.

Is the gearbox it self is exactly the same for both...

its only the end plate on the rear output of the box.

On standard setup the transfer just bolts straight up to it...

on yours a plate with a hole and seal for the output shaft that goes to the transfer is there.

All u have to do, is buy which ever box u want, just make sure not the buy the transfer case, and then take your rear cover with shaft output off and bolt it onto the other box insted of a transfer case.

Both gearboxes are identical except for this point.

cheers

screwy ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

transfer

Post by DR Frankenstine »

It will be an MQ! I had one myself and the divorsed transfer is great for plonking any motor gearbox combo.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

where they in MQs as well?

I saw a few, wrecked one, were all Mks.......

glad i only said probably MK :lol:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

Post by stewie81 »

Thanks screwy for the info that may help if i cant find a divorced type of box...
thanks to others for there reply's also.

Next trick i to find one..

Does any one have a decent 4 spd box ( divorced type ) that they r will to sell ?

Cheers
Stewie
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

I know of someone that has an auto for sale from aMQ with a L28, which came with the divorsed transfer
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

If you ever need a divorsed transfer itself ive got one..... but manuel box would be hard ish to find second hand other than wrecking yards.

Id be buying a 4 speed that came with the transfer on the back and just putting your rear plate on it.

they are more common. guys on here have them, and there for would be cheaper than any other option, just involves you getting ur hands abit greasy for a coupla hours :armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I have one of the 4 speeds you are after, but it is a little bit noisy.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

cheers

Post by stewie81 »

ok i will see what I can come up with.. I think I will be going your way screwt ;)

Thanks all..
stewie
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: cheers

Post by Screwy »

stewie81 wrote:ok i will see what I can come up with.. I think I will be going your way screwt ;)

Thanks all..
stewie


no dramas, let me know if ya need any help with further info :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 52
Joined: Sun Apr 25, 2004 7:01 pm
Location: tamworth nsw

Post by nischev »

I have a gearbox in good nick. Not divorced type but sounds easy to change over. pm me if you can get it from tamworth will be cheap.
madness
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 68 guests