Outer Limits 4x4 Board

I have MQ with 4 spd with L28.. I am looking for another one as this one has seen better days...

But Whilst looking and talking with wreckers I have been to there is 2 types of set up's.???

Mine goes G/box little tail shaft then Transfer ? Is this the common type?

Cheers
Stewie

Yea, you get the T100L transfercase, this has a small propshaft between the gearbox and transfercase, and the T130A transfercase bolts up directly to the gearbox, I believe??

correct.

You have the divorsed transfer.

from that i can tell u that its more than likely an MK, and also its a LWB wagon.

Wat u will find.

Is the gearbox it self is exactly the same for both...

its only the end plate on the rear output of the box.

On standard setup the transfer just bolts straight up to it...

on yours a plate with a hole and seal for the output shaft that goes to the transfer is there.

All u have to do, is buy which ever box u want, just make sure not the buy the transfer case, and then take your rear cover with shaft output off and bolt it onto the other box insted of a transfer case.

Both gearboxes are identical except for this point.

cheers

screwy

It will be an MQ! I had one myself and the divorsed transfer is great for plonking any motor gearbox combo.

where they in MQs as well?

I saw a few, wrecked one, were all Mks.......

glad i only said probably MK

Thanks screwy for the info that may help if i cant find a divorced type of box...
thanks to others for there reply's also.

Next trick i to find one..

Does any one have a decent 4 spd box ( divorced type ) that they r will to sell ?

Cheers
Stewie

I know of someone that has an auto for sale from aMQ with a L28, which came with the divorsed transfer

If you ever need a divorsed transfer itself ive got one..... but manuel box would be hard ish to find second hand other than wrecking yards.

Id be buying a 4 speed that came with the transfer on the back and just putting your rear plate on it.

they are more common. guys on here have them, and there for would be cheaper than any other option, just involves you getting ur hands abit greasy for a coupla hours

I have one of the 4 speeds you are after, but it is a little bit noisy.

ok i will see what I can come up with.. I think I will be going your way screwt

Thanks all..
stewie

stewie81 wrote:ok i will see what I can come up with.. I think I will be going your way screwt

Thanks all..
stewie

no dramas, let me know if ya need any help with further info

I have a gearbox in good nick. Not divorced type but sounds easy to change over. pm me if you can get it from tamworth will be cheap.