I'm using a 60 seiries MC with proportioning valve in my 40. I was wondering if anyone knows if these MCs have residual vavles on the rear circuit?
It's fully bled, the rear shoes are adjusted, and the clearance between the booster rod and MC piston is set. There is too much pedal travel before I get brakes. It feels like the rears are taking a while to fill. Brakes are fine when they come on.
Cheers
Ben
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 Series Master Cyl Residual Valve?
Moderators: toaddog, Elmo, DUDELUX
60 Series Master Cyl Residual Valve?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
There should be a residual pressure valve in the master cylinder where the rear brake line attaches into it. It should be calibrated for rear drum brakes too.
Did you adjust the rear shoes? Maladjusted rear brakes will give you the same sensation. Reverse the vehicle and brake, do this several times or turn the star wheel on the adjuster rod.
Dave
Did you adjust the rear shoes? Maladjusted rear brakes will give you the same sensation. Reverse the vehicle and brake, do this several times or turn the star wheel on the adjuster rod.
Dave
Who is online
Users browsing this forum: No registered users and 0 guests