Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rangie lpg
Moderator: Micka
Rangie lpg
A while ago i was asked to post some pics of a twin tank under floor lpg installation, finally got my tanks re tested and ready to install.
You do not have the required permissions to view the files attached to this post.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
It depends on the type of tank and the valve fittings, it was $80 each tank + parts, because mine were a multivavle fitment (the in,out, pressure relief all in one) the whole brass valve unit had to replaced at $140 each so all up $440 . I am doing the complete installation and once i,m done it will cost me $90 to get complianced.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
If your tanks have the multi valve like mine then you have to replace the whole valve unit as part of the retest is to renew all the valves and seals, and unfortunately the relief valve is part of the fitting and cannot be repaired hence replacing the whole fitting. I rang around and got prices ranging from $220 - $425 per tank ! Mine were 4 years out of date and i was hoping that they didnt fail them as it would have made the conversion un economical if i had to buy new tanks. If you had a single tank with seperate fittings it would only cost about $150 tops.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
If the case is that the V/unit has to be replaced , may take the tank without the unit ?
Where did you get it done ? Will have to start finding out places soon .
Thanks .
All the best , peter .[/quote]
They wont test the tank alone as it must also past a pressure test.
Fleet services in Preston did mine and the guy was very helpful and didnt frow at me doing a diy installation.
Where did you get it done ? Will have to start finding out places soon .
Thanks .
All the best , peter .[/quote]
They wont test the tank alone as it must also past a pressure test.
Fleet services in Preston did mine and the guy was very helpful and didnt frow at me doing a diy installation.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
No need to remove the floor, a bit of jiggling and they go in. I bought the tanks with cradle about 6-7 years ago for $400 and fitted it to my 2dr which is now a ute (with 80ltr lpg tank in tray) so i have done the install before.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Prestons abit far away , hopefully find someone closer .
There are a couple of mobile guys that will come to you -
Gas Life 0419 584 016
Micks mobile testing 0419 476 444
Both quoted same price for mine. Take the tanks out your self it will save you the labour costs. Since your tanks are APA, it shouldnt cost anymore than about $350 for both - depending on condition of course.
There are a couple of mobile guys that will come to you -
Gas Life 0419 584 016
Micks mobile testing 0419 476 444
Both quoted same price for mine. Take the tanks out your self it will save you the labour costs. Since your tanks are APA, it shouldnt cost anymore than about $350 for both - depending on condition of course.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Who is online
Users browsing this forum: No registered users and 4 guests