Outer Limits 4x4 Board

Got 89 SWB TB42 GQ 5 speed manuel....

Put 2 inch coils and 33's in, now i have the slightest Vibration at about 30kms and i have also got a larger one around the 100km mark.

ive heard that putting gearbox packers in to lower the transfer crossmember gets rid of this vibration.....

How thick to the spacers want to be? 6mm? 8mm? less?

cheers guys

screwy

fit longer lower control arms to the rear to even out the angles of the unis or shorter uppers all same same

dieselSWB wrote:fit longer lower control arms to the rear to even out the angles of the unis or shorter uppers all same same

its only a Daily drive, im really not out for that kind of work.....

just a simple fix to the vibration. cheers

screwy on 2inch lift u should get away with 6mm.. probly best option for daily drive road car vibe fixes.. if u gunna buy a kit, get the 6mm kit and if u find u need more just use a few washers either side of the plate..u should be ok with 6mm though

sweet, i was just gunna use some 50 x 6mm flat steel with a coupla holes in it that i had left over from the MQ build....
should do the job.

cheers viper

I want pics of this MQ already

foad wrote:I want pics of this MQ already

hahahaha........ all in good time my young padawon.

This thread is to fix the GQ

Hey i got 2 sets of spacers i took off mine. Thats 4x6mm spacers (two each side) by two kits. It was so bad once i put 4 spacers each side! Now i have dc shaft and adjustable arms.

matt u have them spacers up there or they still down here? i have a mate that will buy them..he wanted them before when u were still here but was slack. still got the same number dude?

nah they are up here, but wouldnt cost much to freight down australia post. My number is 0421315337