Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ SWB gearbox packers?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

GQ SWB gearbox packers?

Post by Screwy »

Got 89 SWB TB42 GQ 5 speed manuel....

Put 2 inch coils and 33's in, now i have the slightest Vibration at about 30kms and i have also got a larger one around the 100km mark.

ive heard that putting gearbox packers in to lower the transfer crossmember gets rid of this vibration.....

How thick to the spacers want to be? 6mm? 8mm? less?

cheers guys

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 23
Joined: Mon May 02, 2005 6:44 pm
Location: S.E MELB

Post by dieselSWB »

fit longer lower control arms to the rear to even out the angles of the unis or shorter uppers all same same
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

dieselSWB wrote:fit longer lower control arms to the rear to even out the angles of the unis or shorter uppers all same same


its only a Daily drive, im really not out for that kind of work.....

just a simple fix to the vibration. cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

screwy on 2inch lift u should get away with 6mm.. probly best option for daily drive road car vibe fixes.. if u gunna buy a kit, get the 6mm kit and if u find u need more just use a few washers either side of the plate..u should be ok with 6mm though
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

sweet, i was just gunna use some 50 x 6mm flat steel with a coupla holes in it that i had left over from the MQ build....
should do the job.

cheers viper :armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

I want pics of this MQ already :)
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

foad wrote:I want pics of this MQ already :)


hahahaha........ all in good time my young padawon. :lol:

This thread is to fix the GQ :armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

spacers

Post by matsmad »

Hey i got 2 sets of spacers i took off mine. Thats 4x6mm spacers (two each side) by two kits. It was so bad once i put 4 spacers each side! Now i have dc shaft and adjustable arms.
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

matt u have them spacers up there or they still down here? i have a mate that will buy them..he wanted them before when u were still here but was slack. still got the same number dude?
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

spacers

Post by matsmad »

nah they are up here, but wouldnt cost much to freight down australia post. My number is 0421315337
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests