Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cracked drain plug
Moderators: toaddog, Elmo, DUDELUX
Cracked drain plug
Was doing a service on my 80 series cruiser yesterday and undid the gearbox drain plug to find that it had cracked around the plug hole and come right off.
What do i do about this ?
[/img]
What do i do about this ?
[/img]
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
1976 FJ45 Landcruiser ute
Mad Cruiser wrote:So if i get the cast alloy bit welded back and retapped... can it be done while it's still on the car or do i have to remove the gearbox ?
Should be able to do it on the car. Just got to make sure you clean all the oil from where ur welding.
It looks like the hole is deeper than the bit that broke off. Have you though about getting a short bolt and some loctite or sealant for a quick fix?
\m/
looks to be a fair amount of thread inside the box ,what about grinding the whats left of the broken thread off and using whats left
otherwise welding it will be a nightmare due to what oil in the box is floatin around will drip when your tryin to weld wich after tryin to do on steel the other day doesn't work the oil gets hot n makes new holes
plus cast alloy is mainly crap material and is really hard to make a good clean weld stick
either way good luck
otherwise welding it will be a nightmare due to what oil in the box is floatin around will drip when your tryin to weld wich after tryin to do on steel the other day doesn't work the oil gets hot n makes new holes
plus cast alloy is mainly crap material and is really hard to make a good clean weld stick
either way good luck
drain plug
You may be able o get away with some liquid steel or devcon to stick the treaded bit back in until you can get it welded...
Custom body work by trees and rocks...
" Where's the party Officer "
Ruff Gq wrote "and i am so stupid that i don't know how it is done."
" Where's the party Officer "
Ruff Gq wrote "and i am so stupid that i don't know how it is done."
Who is online
Users browsing this forum: No registered users and 1 guest