Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spare 31"

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Spare 31"

Post by NUGGS »

Upgrading to 31/10.5 MTR's in the very near future. :D

What have some of you guys done to accomodate the extra width on the spare wheel carrier??

Also any tips for extending break lines?? Probably after a cheaper option here. Don't really have $$ spend on extended line kits etc.
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Yah, another perthie on 31's. I have bolted the 31 on std carrier fine. I am moving it inside soon as it starting to rip the door off, rust is the cause.

Brake lines, swift ones bolt on i have heard. Not sure on age swift but.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

31" on the standard carrier!!

I can bearly get my 235/75 on there. :?
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Hardtops must be different then soft tops then.
You do not have the required permissions to view the files attached to this post.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

Put some spacer blocks between the carrier and the door and use longer bolts to reattach the carrier to the door.
4 Pot Screama
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

NUGGS wrote:31" on the standard carrier!!

I can bearly get my 235/75 on there. :?
I have a 33"mud terain on mine,
you are not trying ya blouse :finger: :lol:
Peter
Top
Posts: 174
Joined: Thu Sep 02, 2004 12:19 pm
Location: newcastle

Post by rgzook »

Hey guys i got a 31 mtr on the standard carrier and mines a 97 coily softtop..

Don't forget the cheese cutters your running now may look tight on the back due to the offset of the rim but your gonna need differrent rims so shop around...
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

31's go on the standard carrier no wuckers thou got to watch for cracks in the carrier

i had to weld mine up due to cracked standard mounts
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

could always run the spare with no air in it also - would allow it to squash up against the body if its rubbing when hard =) just make sure you got a compressor handy should you actually need the spare!!!

speaking of which - how often has everyone on here actually USED their spare?!? ive never seen a zuk with a flat... lol
The worst thing about censorship is ███████.
Top
Posts: 292
Joined: Wed Sep 24, 2003 2:02 pm
Location: QLD

Post by TWISTER »

When I bought my zook the spare was almost flat and the tire was against the back window. They are 30"x9.5" tires so when it was inflated it was worse. So I turned it round the other way so the front of the rim is facing towards the back door. There is now a gap between the wheel and back door. :D
Top
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

extend the brake line hanger if you think it will give you enough..
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Top
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Contact:
Contact suzukiboy

Post by suzukiboy »

Try this

http://www.designsofsteel.com/SpareTire ... nMount.htm
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

The extra leverage from the raised height will stuff the door hinges mighty quick.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

droopypete wrote: I have a 33"mud terain on mine,
you are not trying ya blouse :finger: :lol:
Peter
:rofl:

Musn't be eatin enough weeties....................

I am looking at buying sum new 15x7 ROH F100 rims. Will these be offset enough for 31's or will still need cut and weld. Do the guys who do this sort of work know how much more to offset rims???
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

depends on the offset of the rim the tyre is on .. I could fit a 32x11.5 on a 15x8 rin with a 3 inch offset BFG on easier than a 235/75 on stock rims
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

gfdgfdsgd

Post by SiKiD_01 »

how hard could this be to make? and i dont think you need to raise the tyre upwards if its going to be coming outwards.
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

apparently the speedy wheels have more offset than ROH... i got speedys brand new for $55ea i think?
The worst thing about censorship is ███████.
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

make yourself a rear bar/tyre carrier .
the bigger tyre will rip the rear door off over time,soft or hard top then its a pain to repair,easier to prevent before it happens.
my first zuk broke the carrier then tore the hinge out of the body after the carrier was braced.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Drew wrote:make yourself a rear bar/tyre carrier .
the bigger tyre will rip the rear door off over time,soft or hard top then its a pain to repair,easier to prevent before it happens.
my first zuk broke the carrier then tore the hinge out of the body after the carrier was braced.
Who made yours drew. It looks sweet. Or if you made it, how much to make another one. My 31' is doing the rip of door trick at the moment.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

I made it ,cost depends on how you want it & if i can get offcuts of steel or if i have to buy a whole lengths.send me a pm if you want to come & have another look & a chat.
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

Drew - i be keen on this also! can you post up photos?
The worst thing about censorship is ███████.
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

With my old rims (31mt/rs on 15 x 7 roh's) i use to put my spare onto the stock wheel carrier backwards and just put the top 2 nuts on it and i never had a problem with it other than the rim gets a mark where it rubbed on the holder. Though now with my offset 15 x 8's the rim sits over 1" off the back door.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 50 guests