've made a complete set of new copper brake pipes for my 89 RR. Also new steel flexibile hoses. But there is no example how everything should be connected Which output of the main cilinder goes to which piston in which claw? Is there a drawing about this or doesn't it really matter?
Cheers Bowy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Brake scheme RR classic
Moderator: Micka
Have you looked in the workshop manual? Should have something in there.
The manuals are hosted on the Spanishtrailrovers site but I can't seem to get there at the moment? Perhaps the site is gone now :(
PM me if you want a copy of the brakes section sent through.
The manuals are hosted on the Spanishtrailrovers site but I can't seem to get there at the moment? Perhaps the site is gone now :(
PM me if you want a copy of the brakes section sent through.
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Summarised from Haynes manual:
There are 2 brake circuits - primary and secondary.
Primary circuit is connected to the rear port of the master cylinder, secondary to the front port.
Each front caliper has 2 pairs of pistons and 2 brake lines.
The upper pair of pistons of both front calipers are connected to the primary circuit.
The lower pair of both front calipers are connected to the secondary circuit.
Both rear calipers are connected to the primary circuit.
Having a quick look at my 84 model in the dark, it appears to be a little different to this.
The master cylinder on your 89 model is different to mine (changed in 87).
There are 2 brake circuits - primary and secondary.
Primary circuit is connected to the rear port of the master cylinder, secondary to the front port.
Each front caliper has 2 pairs of pistons and 2 brake lines.
The upper pair of pistons of both front calipers are connected to the primary circuit.
The lower pair of both front calipers are connected to the secondary circuit.
Both rear calipers are connected to the primary circuit.
Having a quick look at my 84 model in the dark, it appears to be a little different to this.
The master cylinder on your 89 model is different to mine (changed in 87).
John
Who is online
Users browsing this forum: No registered users and 0 guests