Page 1 of 1
Reverse switch
Posted: Tue Jun 07, 2005 10:21 pm
by mike
My reverse swith is Fubar'd. I've replaced the bit that screws into the gearbox with no joy. I'm told that from here it's a pull the gearbox out and apart to fix. I've bodge'd a switch off the gearstick but this is less than ideal.
Does anyone have any thought/experience?
Posted: Wed Jun 08, 2005 2:24 pm
by Pinball
dice it and manually switch it off the dash?
failing that, a limit in the reverse channel at the stick works for me..
Spock
Posted: Wed Jun 08, 2005 5:02 pm
by germo
nup just do what it sounds like you have done. get a little limit switch like pinball said and mount it to a bit of tin, then tech screw in place, worked for me.
ok so I added nothing new
enjoy
ashley
Posted: Sun Jun 12, 2005 7:03 pm
by crispy zook
i just run a switch on the dash
passed a blue slip like that
i dont use it n e ways
Posted: Mon Jun 13, 2005 12:30 am
by mike
crispy zook wrote:i just run a switch on the dash
passed a blue slip like that
i dont use it n e ways
Wow didn't realise that was adequate... cool