Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox troubles... HELP!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 34
Joined: Mon Jan 12, 2004 5:50 pm
Location: Brisbane

gearbox troubles... HELP!

Post by tonks »

hi guys

i have just taken my gear lever out of my 1985 5 speed gearbox to replace the locating pin on it (the pin that goes at the back of the gear selector). I replaced it and went to put the gear lever back in, but when it slotted in it was stuck in third. The gear lever slops from side to side in an arc, but doesnt shift to the right, or backwards. I cant get it to select any other gear!!!! I am wondering if anyone has any idea on how to fix this problem. Anyadvice would be greatly appreciated.

Thanks for your time

michael tonks
85 lwb suzuki sierra, 1 litre transfer, 2 inch lift, hammered guards, 31 inch swampers.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

I would say at aguess that you have missed the selector when you put the shifter back in. Pull it out again and make sure the selector is in the middle when you put the shifter back in.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 34
Joined: Mon Jan 12, 2004 5:50 pm
Location: Brisbane

Post by tonks »

i have tried several times to slot it back in. Each time it goes in to position, but it doesnt want to move??
85 lwb suzuki sierra, 1 litre transfer, 2 inch lift, hammered guards, 31 inch swampers.
Top
Posts: 165
Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld

Post by inka »

ok i hear this problem well as it happened to me :?

take the stick out and check whether the shift rods line up. you will prolly have to remove the housing that the stick bolts into...4 bolts hold it onto top of gearbox. line up the rods bolt it back together and put stick back in. all should be good ;)
rockstock gq patrol
Top
Posts: 34
Joined: Mon Jan 12, 2004 5:50 pm
Location: Brisbane

Post by tonks »

Thanks alot inka. I took your advice, and you were right, the selectors werent lining up. Shifts smoother now too.

Cheers buddy

Michael Tonks
85 lwb suzuki sierra, 1 litre transfer, 2 inch lift, hammered guards, 31 inch swampers.
Top
Posts: 165
Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld

Post by inka »

not a worry michael ;)

its a zook thing :twisted:
rockstock gq patrol
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests