Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Feroza Gasket

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 9
Joined: Thu Oct 07, 2004 2:58 am
Location: St. Lucia, Caribbean

Feroza Gasket

Post by babyfame »

Hi Guys,

Need some help here with an overhauling kit for a 1992 Feroza, Caburetor engine. I get them selling down here but the valve seals fit to slack and the seals are of incorect sizes. The only thing that works is the Cylinder head gasket. My engine # is 0237225.

Now i got a new Gasket but it's missing some holes to match the head. These are the small holes close to the pistons. DO you all think I should pry the hole in myself and does anyone have an image of the head saying what the various holes are for - i mean which is for water and which is for oil.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Try looking through the service manual it may help? Sometimes it's normal for not all the holes in the gasket to be cut- it's got to do with the way they manufacture the head and block.
David
Top
Posts: 9
Joined: Thu Oct 07, 2004 2:58 am
Location: St. Lucia, Caribbean

help from manual

Post by babyfame »

Tried that already, but it doesn't say.
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 12 guests