double cardin joint question
Posted: Tue Jun 14, 2005 10:17 pm
Can a cardin joint be re-built? mine is making nasty tink tink noises and the occasional crunch it has a small amount of movement in the cage (probably 1-2 mm)
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
double cardin joint question
Page 1 of 1
Posted: Tue Jun 14, 2005 10:30 pm
Yep, it depends on what worn though, especially the ball joint in the middle.
Posted: Tue Jun 14, 2005 10:56 pm
a bit tricky you can buy a non roller bearing center ball its solid brass i used to make drivesharfts dont use hammer and punch to fit the new unis use a hand press or vice 
joint
Posted: Wed Jun 15, 2005 5:58 pm
Got a quote today from hardie spicer $250 which is new unis and new centre kit fitted. Not to bad really!!
Posted: Wed Jun 15, 2005 11:34 pm
if you dont have the tools and i dont know how good your mech. skill is get it done i would only do mine because if done 100th in the past but if want a go just post it
i would only do mine because if done 100th in the past but if want a go just post it