Wreckers please help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vitara OEM Exhaust header
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Vitara OEM Exhaust header
Would a vitara 8v exhaust header bolt into the stock OEM Sierra exhaust system or would i have to use the original Sierra ones if i swapped the G13BA head with one from a G16a
Wreckers please help
Wreckers please help
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
in light of all the other threads i thought i bup this Post
I have finally scored a cultus engine and was thinking about the custom header. As i will be leaving the exhaust a stock for the next few weeks/months i am toying around with options for the Twin CAM flange welded unto an oem extractor/exhaust.
The vitara ones i've seen on the web look to be a different shape to the log barrel design of the Sierra one and is probably less restrictive being for a ever so slightly larger engine.
So if it bolts into place i might as well take the vitara one as i want to have one pre-built and ready to bolt into place
(not to mention i can reverse it all back to a SOHC if something goes wrong
)
I have finally scored a cultus engine and was thinking about the custom header. As i will be leaving the exhaust a stock for the next few weeks/months i am toying around with options for the Twin CAM flange welded unto an oem extractor/exhaust.
The vitara ones i've seen on the web look to be a different shape to the log barrel design of the Sierra one and is probably less restrictive being for a ever so slightly larger engine.
So if it bolts into place i might as well take the vitara one as i want to have one pre-built and ready to bolt into place
(not to mention i can reverse it all back to a SOHC if something goes wrong
)-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Thanks Beastmavster that helps i just don't want to waste an hour drive to the wreckers only to find out i didn't need itBeastmavster wrote:The aftermarket vitara 8v and Sierra 1.3 headers are the same to my knowledge.
What about the OEM ones though
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Who is online
Users browsing this forum: No registered users and 0 guests