Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

speedo gear

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

speedo gear

Post by hypo »

the speedo in my luxy has crapped itself, i have replaced the inner and outer cable, not that, i replaced the removable gear part in the back of the tcase, it was stripped, this fixed the problem tempory, but its doing it again.

i think its the gear on the output shaft of the tcase, is it possible 2 replace this by removing the 7 bolts on the rear of the tcase where the rear output flange is ? or does the case need 2 b dismantled ??
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Im pretty sure you only need to remove the rear cover to fix this.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Remove the output flange and the first cover from the case and the speedo gear is the first thing on the shaft, tip watch out for the small ball that stops the gear from spinning, it sits between the gear and the shaft.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

cool thanx guys ill pull it apart 2 morra a check it out :)


just didnt wanna go tearing into it if i was going the rong way bout it :armsup:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest