Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tail lights not working

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 4
Joined: Fri Jun 24, 2005 5:13 pm

Tail lights not working

Post by starion fil »

Hi everyone
IM having some problems getting my tail lights to work on the a MQ, addintionally the dash lights are also not working. Ive have power at the fuse box, no broken fuse however no power at the rear of the car. My headlights work and my stop lights and indicators function. It seems to be just the tail lights and number plate lights.

If anyone can help with thsi it would be greatly appreciated.
Cheers
Top
Posts: 5
Joined: Wed Jul 13, 2005 8:36 pm
Location: goldcoast

Post by confusedmav »

check the wiring loom to rear along chassis as have seen worn body mounts cause the body to drop towards chassis, resulting in broken (cut) wires in loom.
go harder
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

for the dash lights check the dimmer switch is connected and working. Just use a bit of wire to short across the plug and check the lights come on. If they do then the switch is the problem. Otherwise check for power at the switch and work your way either forward or backwards.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests