Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundy Suspension Lift............beyond current 2"?????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Bundy Suspension Lift............beyond current 2"?????

Post by gogo »

Hi,

Current set up is 2" tough dog shocks and coil springs (yes, I have all round coil springs, no leaf springs).

If I were to increase the height to say 4", is it possible to do as below? To replace the current tough dog shocks and springs is too much $$ So:

1. I can put 2" spacers on the coils....thats not a problem.

2. So the shocks; either reweld the mounting points lower, or extend the shocks with a 2" extension, which I will have to custom make. Which is best?
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

You can certainly use the spacers for an extra inch or 2 on the coils, however I have no idea about the shock mounting repositioning and rewelding or extensions.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest