Zook dash's

Post by **bubs** » Sun Jul 10, 2005 7:04 pm

Might seam stupid, but from what I have seen in photos the 1.3 Litre dash has more room between the end of the dash and door?

Is this right this is so I can fit a 42OD tube down to the floor for my to be built cage.

If there is more room can the 1.3 Litre zook dash be fitted to the 1L?

Post by **OldGold** » Sun Jul 10, 2005 11:06 pm

The only 1l I've ever looked inside had a very similar dash to my NT.

Post by **redzook** » Mon Jul 11, 2005 6:36 am

bubs wrote:Might seam stupid, but from what I have seen in photos the 1.3 Litre dash has more room between the end of the dash and door?

Is this right this is so I can fit a 42OD tube down to the floor for my to be built cage.

If there is more room can the 1.3 Litre zook dash be fitted to the 1L?

pretty sure u are right
as u can fit 42od tube down with the first widetracks dash

is yours the metal dash?

Post by **spamwell** » Mon Jul 11, 2005 9:25 am

is it this type of dash?

i could not see a tube fitting down there without any cutting

Post by **christover1** » Mon Jul 11, 2005 10:11 am

you could possibly remove the plastic ends and/or do some trimming easily enough. It's worth a look into, anyway.
christover

Post by **ljxtreem** » Mon Jul 11, 2005 10:33 am

Thats a 1ltr dash

Mock

Post by **ljxtreem** » Mon Jul 11, 2005 10:37 am

would be a big job fitting a 1.3 dash into a 1ltr as they mount verry diferantly. a 1ltr dash is part or the body and would have to be picked out.

Mock

Post by **Drewfus** » Tue Jul 12, 2005 12:20 pm

if you had a 1.3 body & dash, then the 42o.d. tube will just fit. on a 1 litre body and dash, cutting is required.

ljxtreem wrote:would be a big job fitting a 1.3 dash into a 1ltr as they mount verry diferantly. a 1ltr dash is part or the body and would have to be picked out.

Mock

Agree, it's easier to completely change bodies then to just change the dash as it will require alot of stuffing around.

Cheers,

Drewfus

Post by **suz_rolly** » Tue Jul 12, 2005 11:02 pm

PEOPLE ITS NOT THAT HARD AS I DONE IT TWO WEEKS AGO

THIS WAS THE STEEL DASH SAME AS SAMS

IT VERRY POSABLE

Post by **Russian** » Thu Jul 14, 2005 4:38 am

just my pair of $0.01s:

very nice minimalistic 1liter dash made by spidetrax

Post by **bubs** » Thu Jul 14, 2005 5:28 pm

suz_rolly wrote:PEOPLE ITS NOT THAT HARD AS I DONE IT TWO WEEKS AGO

THIS WAS THE STEEL DASH SAME AS SAMS

IT VERRY POSABLE

Can you check 42mm OD tube will fit down beside the dash when the door is closed?

If not a spidertrax style dash is not out of the question

Post by **bubs** » Thu Jul 14, 2005 5:29 pm

Also just with removing the plastic end caps there is not enough room to allow 42OD tube to fit, passenger side is fine, drivers side is not

Post by **bubs** » Thu Jul 14, 2005 5:31 pm

My dash is like that spamwell posted, steel

Post by **ljxtreem** » Thu Jul 14, 2005 5:47 pm

Steel is better anyway

Mock

Post by **j-top paj** » Thu Jul 19, 2007 11:03 pm

Russian wrote:just my pair of $0.01s:

very nice minimalistic 1liter dash made by spidetrax

are you still on here? id like to see the pics if possible

Outer Limits 4x4 Board

Zook dash's

Zook dash's

Re: Zook dash's

Who is online