Page 1 of 1
Zook dash's
Posted: Sun Jul 10, 2005 7:04 pm
by bubs
Might seam stupid, but from what I have seen in photos the 1.3 Litre dash has more room between the end of the dash and door?
Is this right this is so I can fit a 42OD tube down to the floor for my to be built cage.
If there is more room can the 1.3 Litre zook dash be fitted to the 1L?
Posted: Sun Jul 10, 2005 11:06 pm
by OldGold
The only 1l I've ever looked inside had a very similar dash to my NT.
Re: Zook dash's
Posted: Mon Jul 11, 2005 6:36 am
by redzook
bubs wrote:Might seam stupid, but from what I have seen in photos the 1.3 Litre dash has more room between the end of the dash and door?
Is this right this is so I can fit a 42OD tube down to the floor for my to be built cage.
If there is more room can the 1.3 Litre zook dash be fitted to the 1L?
pretty sure u are right
as u can fit 42od tube down with the first widetracks dash
is yours the metal dash?
Posted: Mon Jul 11, 2005 9:25 am
by spamwell
is it this type of dash?
i could not see a tube fitting down there without any cutting
Posted: Mon Jul 11, 2005 10:11 am
by christover1
you could possibly remove the plastic ends and/or do some trimming easily enough. It's worth a look into, anyway.
christover
Posted: Mon Jul 11, 2005 10:33 am
by ljxtreem
Thats a 1ltr dash
Mock
Posted: Mon Jul 11, 2005 10:37 am
by ljxtreem
would be a big job fitting a 1.3 dash into a 1ltr as they mount verry diferantly. a 1ltr dash is part or the body and would have to be picked out.
Mock
Posted: Tue Jul 12, 2005 12:20 pm
by Drewfus
if you had a 1.3 body & dash, then the 42o.d. tube will just fit. on a 1 litre body and dash, cutting is required.
ljxtreem wrote:would be a big job fitting a 1.3 dash into a 1ltr as they mount verry diferantly. a 1ltr dash is part or the body and would have to be picked out.
Mock
Agree, it's easier to completely change bodies then to just change the dash as it will require alot of stuffing around.
Cheers,
Drewfus
Posted: Tue Jul 12, 2005 11:02 pm
by suz_rolly
PEOPLE ITS NOT THAT HARD AS I DONE IT TWO WEEKS AGO
THIS WAS THE STEEL DASH SAME AS SAMS
IT VERRY POSABLE
Posted: Thu Jul 14, 2005 4:38 am
by Russian
just my pair of $0.01s:
very nice minimalistic 1liter dash made by spidetrax
Posted: Thu Jul 14, 2005 5:28 pm
by bubs
suz_rolly wrote:PEOPLE ITS NOT THAT HARD AS I DONE IT TWO WEEKS AGO
THIS WAS THE STEEL DASH SAME AS SAMS
IT VERRY POSABLE
Can you check 42mm OD tube will fit down beside the dash when the door is closed?
If not a spidertrax style dash is not out of the question
Posted: Thu Jul 14, 2005 5:29 pm
by bubs
Also just with removing the plastic end caps there is not enough room to allow 42OD tube to fit, passenger side is fine, drivers side is not
Posted: Thu Jul 14, 2005 5:31 pm
by bubs
My dash is like that spamwell posted, steel
Posted: Thu Jul 14, 2005 5:47 pm
by ljxtreem
Steel is better anyway
Mock
Posted: Thu Jul 19, 2007 11:03 pm
by j-top paj
Russian wrote:just my pair of $0.01s:
very nice minimalistic 1liter dash made by spidetrax
are you still on here? id like to see the pics if possible