Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

DC inverter welders?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

DC inverter welders?

Post by Nev62 »

Has anybody used these DC inverter welders before? Cheap and nasty or usable as an emergency tool in the middle of nowhere?



http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 4393217238
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 141
Joined: Wed Mar 02, 2005 5:59 pm
Location: bendigo

Post by AdrianGQ »

i have used these type of welders before and they are very good but they cost 2-3 grand for a reputable brand i have not used or heard of this brand but for that price you cant go wrong
Top
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

I have a ryobi branded one, they are great. I prefer it over the standard transformer type
turbo deisel LWB, 2inch body, endless air, arb front and rear lockers, 34 JT2s, warn winch, carputer/GPS, working handbreak,
Top
Posts: 126
Joined: Wed Mar 31, 2004 9:55 am
Location: Toowoomba

Post by wannaberacer »

Yeah I bought one of these for the primary purpose of re-selling it to make more $$$....which I managed to achieve.

I tried it out a few times and it worked beautifully. Did not weld for too long or thick plates but it did the job and was nice and compact.

As for its long term durability who would know with these cheapies.
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

i have this model at home, very good for only small fine detail jobs, and yes i do a mig and larger arc(transformer type) and oxy, welds are a high penertration, and good for panel work, and ive used it a couple of times to do bigger jobs as in 5-6mm plate, not bad for soething that wieghs around the 3 kg mark

oh and they retail in stores around me for 299-350 range
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 135 guests