Outer Limits 4x4 Board

Posted: **Wed Jul 20, 2005 8:44 pm**

What ratio in the diffs will i have to run for 44" tyres in GQ

Posted: **Wed Jul 20, 2005 9:54 pm**

4.88 is the highest you can get (that I know of) so that and a lot of spare CVs and axles ...

Posted: **Wed Jul 20, 2005 10:01 pm**

RoldIT wrote:4.88 is the highest you can get (that I know of) so that and a lot of spare CVs and axles ...

to get raios more suitable than 4.88's youd have to import from iceland, i remeber hearing the have 5.** somethings, which will be as close as you can get,

oh, and post pics of your rigg on the 44's

Posted: **Wed Jul 20, 2005 10:25 pm**

ozy1 wrote:
RoldIT wrote:4.88 is the highest you can get (that I know of) so that and a lot of spare CVs and axles ...
to get raios more suitable than 4.88's youd have to import from iceland, i remeber hearing the have 5.** somethings, which will be as close as you can get,

oh, and post pics of your rigg on the 44's

5.12 and 5.23 I think it was, but cheezy destroyed them both in hours with 42s...

Posted: **Wed Jul 20, 2005 11:34 pm**

ive heard 6.72 (if u can get them) run well on 44`s

Posted: **Thu Jul 21, 2005 8:22 am**

Cool thanks for that. Just looking at the moment have 37" but wana go big

Posted: **Thu Jul 21, 2005 1:33 pm**

suzi_on_46s wrote:ive heard 6.72 (if u can get them) run well on 44`s

I think these were out of an Urvan, but only one end.... I seem to remember Wendle ownin me one day after I pointed them out.

Posted: **Thu Jul 21, 2005 8:55 pm**

people run them in america

Posted: **Thu Jul 21, 2005 9:30 pm**

rock crawlers in the transfer with 4.88s maybe?

Posted: **Fri Jul 22, 2005 1:29 pm**

suzi_on_46s wrote:people run them in america

they don't have GQs in the USA so how could they be running them

Yes the yannks run 44s but they are on things like Dana 60's and Mogs and Rockwells which have the deep diff gears available

Posted: **Fri Jul 22, 2005 3:20 pm**

ratio of CV's to wheeling trips will be about 5.7:1

Posted: **Fri Jul 22, 2005 8:01 pm**

Wendle wrote:ratio of CV's to wheeling trips will be about 5.7:1

Posted: **Sat Jul 23, 2005 10:18 am**

I have a set of 4.88's F&R (ring and pinion only) for sale if interested.

Posted: **Sat Jul 23, 2005 11:33 am**

From what I can gather... the only streetable tyre as far as ratios are concerned, not legalities, would be a 38 there is nothing reliable for 44's ??...

For 44's the best/strongest you could do would be GU's with 4.8's + crawler gears or dual transfers and then crawler gears in one (maybe both I assume there is a reason cheezy only has crawler gears in one case).

Shave shave shave shave shave...

Posted: **Sat Jul 23, 2005 6:40 pm**

4.88 are too weak and can be destroyed with 36.s if you drive them hard. i would run dual cases and then you have the right ratio for 44's and change up for little tyres like 35 etc. my overall ratio is 87:1. i have std gears dual transfer, and 4.625's on my gu diffed gq

cheers bru

Posted: **Sat Jul 23, 2005 8:50 pm**

This thread is a joke............ right

Bazzle

Posted: **Sat Jul 23, 2005 11:15 pm**

why? there was a high top GQ in NSW I think, on 44 TSL's.

Outer Limits 4x4 Board

Ratio for 44" tyres

Ratio for 44" tyres

...