3 litre .tensioner pulley bearing.

Post by **dkne5** » Wed Jul 27, 2005 1:11 am

Got a 3 litre 02 patrol,the tensioner pulley bearing is very noisy,rang nissan and was told that they don't just sell the bearing,Have to buy complete tensioner assembly. (new tensioner $400).Any of you folks out there know of an aftermarket supplier for this bearing.
cheers Dave WA.

Post by **InSanE** » Wed Jul 27, 2005 9:32 pm

i can get you a few seccond hand tentioner pulley+bearing if you like we have a heap of them in the warranty room at work generally the hydraulic tentioner part of them fails but the bearing and idler pulley is fine i can send a few via post for you if you like beacuse i am in melbourne just have to rummage through store room and find them?

Post by **mkpatrol** » Thu Jul 28, 2005 10:15 am

Is the bearing removable from the pulley?

If it is, just replace the bearing with an equivalent from a bearing shop. The bearing will have an ID number which they can use to match anew one for you.

Post by **dkne5** » Thu Jul 28, 2005 12:18 pm

Problem has been solved,took the pulley to the local garage,matched the bearing up to one to suit a rodeo,cost a six pk of beam&coke.thanks for your help guys

Outer Limits 4x4 Board

3 litre .tensioner pulley bearing.

3 litre .tensioner pulley bearing.

Who is online