Outer Limits 4x4 Board

Posted: **Mon Aug 01, 2005 10:48 am**

I have a 1995 TDI Discovery I have a small crack in the housing, the diff centre has been removed. I have rung a couple of mobile welders but as they have not welded a diff have asked what material it is made of.

I have contacted landrover dealers and they can't help. I am located in Sydney can anyone recommend a mobile welder and what is the diff material ?

Regards,
Joe

Posted: **Mon Aug 01, 2005 10:49 am**

Steel.

Posted: **Mon Aug 01, 2005 8:46 pm**

HSV Rangie wrote:Steel.

Really?

Posted: **Mon Aug 01, 2005 8:57 pm**

The housing is easy to weld - no ida what grade steel but it welds easily without pre or post heat. A mig with mild steel wire and argoshield 50 will probably work best, but a stick with general purpose rods is fine also.

Posted: **Mon Aug 01, 2005 9:28 pm**

since you will have the welder out, beef it up so it dosn't happen again.

Posted: **Mon Aug 01, 2005 9:58 pm**

Low carbon steel

Posted: **Tue Aug 02, 2005 7:44 am**

yes just your basic steel.

Nothing exotic there.

Michael.

Outer Limits 4x4 Board

Diff Housing Material

Diff Housing Material