5.12's into a sierra

Post by **jtraf** » Tue Aug 02, 2005 5:03 pm

What has to be done to fit vitara 5.12's into a sierra?

Centers will be welded if that makes a difference at all.

James

Post by **greg** » Tue Aug 02, 2005 5:05 pm

jtraf wrote:What has to be done to fit vitara 5.12's into a sierra?

Centers will be welded if that makes a difference at all.

James

Hi james,

there is a very detailed write up to this topic in here somewhere... i recall a fellow from sydney with a coiled rear end coversion did a big write up on it.

cheers

Post by **christover1** » Wed Aug 03, 2005 12:30 am

These may help James. christover

http://www.outerlimits4x4.com/PHP_Modul ... php?t=8753

http://www.spidertrax.com/drivetrain_rts.htm

http://www.outerlimits4x4.com/PHP_Modul ... tre+sierra

http://www.outerlimits4x4.com/PHP_Modul ... tre+sierra

Post by **bigred** » Wed Aug 03, 2005 1:54 pm

I Just Completed that conv, front will drop straight in and if you are going to weld the rear then all you need is the crown wheel and pinion

Post by **-Mandy-** » Wed Aug 03, 2005 4:45 pm

Grumpy had 5.12's.......both went straight into NT diffs,also had an EZI lokka in the rear.

Post by **bigred** » Wed Aug 03, 2005 9:49 pm

i found it easier to locate a pair of fronts a lot cheaper too

Outer Limits 4x4 Board

5.12's into a sierra

5.12's into a sierra

Re: 5.12's into a sierra

Who is online